Beatbot AquaSense Robotic Pool Cleaner Beatbot Robotic Pool Cleaner

How to videos for AquaSense Pro

How to install clarifying agent
How to set network during first use
How to update the software
How to use different clean modes

How to videos for AquaSense

How to Clean & Maintain the Robotic Pool Cleaner
How to Use the Robotic Pool Cleaner
How to Add Your Device to Beatbot APP
FAQ

General

For AquaSense Pro

For AquaSense

Service

We have more than 10 years of experience in the robotics and Al industry and served billions of peopleworldwide. Among them, Siler Wang, the CEO, began his journey with window-cleaning robots, mastering the art of making machines climbwalls-an expertise he now applies to the Beatbot pool robots. He also collaborated on solar robots with major companies, blendingcutting-edge tech with practical solutions.

At present, manufacturers of swimming pool cleaning tracks mainly focus on the ease of use and cleanliness of swimming pool robots, and their intelligence and movement capabilities are relatively weak. Therefore, Beatbot focuses on two core technologies: first, high-precision sensors + intelligent navigation planning capabilities to improve the equipment's obstacle avoidance ability and cleaning efficiency; second, more efficient motor and impeller fluid and flow channel optimization, bringing more powerful cleaning Capacity and endurance

In order to provide the best service, we currently only open to the United States,Australia and European Union.

It is suitable for swimming pools of various shapes and made of vinyl, fiberalass, ceramic or other materials.

Yes, our robot can be safely used in salt water with a concentration not exceeding 5000 ppm. The concentration of salt in most home swimming pools does not exceed the above concentrations.

AquaSense Pro comes with a two-layer filter that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).

It is suitable for swimming pools of various shapes and made of vinyl, fiberalass, ceramic or other materials.

Aquasense Pro can complete water surface cleaning for up to 9.5 hours or pool bottom cleaning for up to 5 hours in a single charging cycle.The above data are the test results of Beatbot laboratory, and the details are always subject to the actual operating environment.

AquaSense Pro can work with beach entry pools as long as the water depth is over 1.6ft, as AquaSense Pro is designed to operate within a depth range of 1.6ft to 9.8ft. If the water depth is less than 1.6ft, then the robot will return to the water of deep side.

No need to dry the robot, as long as there is no excess salt in the pool water and the pH is neutral, if not please ranise the robot first.

Yes, the robot can work without WI-Fi. The modes on the robot can cover the cleaning of all areas, please check and select the corresponding mode before starting.

Yes, it works on both in-ground and above ground pools.

The filter basket's capacity of AquaSense Pro is 3.7L.

AquaSense Pro is equiped with 10,400mAh battery and it requires only 3.5 hours for a full recharge. The charging time may longer when temperature is below 77℉.

Yes, our robot can be safely used in salt water with a concentration not exceeding 5000 ppm. The concentration of salt in most home swimming pools does not exceed the above concentrations.

It is suitable for swimming pools of various shapes and made of vinyl, fiberalass, ceramic or other materials.

AquaSense can support cleaning time of up to 3.5 hours in quick mode (bottom cleaning) and 2.5 hours in standard mode (bottom + walls cleaning). The above data are the test results of Beatbot laboratory, and the details are always subject to the actual operating environment.

No need to dry the robot, as long as there is no excess salt in the pool water and the pH is neutral, if not please ranise the robot first.

Yes, the robot can work without WI-Fi. The modes on the robot can cover the cleaning of all areas, please check and select the corresponding mode before starting.

Yes, it works on both in-ground and above ground pools.

The filter basket's capacity of AquaSense is 2L.

AquaSense is equiped with 6700mAh battery and needs about 3hrs charging. The charging time may longer when temperature is below 77℉.

If returns or exchanges occur due to product quality issues, all costs will be covered by beatbot.

You can check whether the robot has been sent out and if there is already logistics information. If the logistics status is not updated for a long time during after shipped, you can contact us directly, we will assist you to solve the problem.

Please contact customer service service@beatbot.com, or your authorized dealer immediately and we will ship the missing parts to you.

Orders will be shipped from local warehouses. After receiving the order, usually it can be delivered within 3-7 days.

Customers have the right to apply for a return within 30 calendar days after delivery of the product. We will offer a free return shipping label.

The robot comes with a 2-year warranty.